Up for sale is a 8.8 Mustang Cobra rear end with 3.27 gear ratio with limited slip. Comes complete with rear rotors calipers brackets Etc. This is nothing GT rear end that has the 10 inch rear rotors this has the 11.3 rear rotors.
WELCOME to the Parts and Accessories Super Store! We have over 12,500 parts available for your 356, 911, 912, 914, 930, Spyder Replicas, and all other models. We provide Excellent Service - Have Hard to Find Parts - Ship same day - Ship Anywhere in the World - Returns are acceptable for any reason up to 14 days! THANK YOU! Eccentric screw for rear axle of C2/C4 (1989-1994) models. Don't forget ...
WELCOME to the Parts and Accessories Super Store! We have over 12,500 parts available for your 356, 911, 912, 914, 930, Spyder Replicas, and all other models. We provide Excellent Service - Have Hard to Find Parts - Ship same day - Ship Anywhere in the World - Returns are acceptable for any reason up to 14 days! THANK YOU! Rear axle plug for 911 and 912 with GKN/Loebro axles (1965-1968) models....
The item may have some signs of cosmetic wear, but is fully operational and functions as intended. Brand: EZ Go Compatible Make: E-Z-GO Part Type: Rear Differential unit Compatible Year: 2007, 2006, 2005, 2004, 2003, 2002 UPC: 01123345667789 The Item up for auction is a rear differential with springs, shocks, brake cables, and DC 48 volt motor. Will sell complete or in parts, message me if inte...
Returns Accepted: Returns Accepted Item must be returned within: 14 Days Refund will be given as: Money Back Return shipping will be paid by: Buyer Restocking Fee: No Return policy details: Placement on Vehicle: Array Warranty: No THIS AUCTION FOR 2001 SUABRU IMPREZA R/S REAR AXLES LEFT AND RIGHT , REMOVED FROM A 2001 IMPREZA R/S, IN USED WORKING CONDITION . LOOK PICTURES PLEASE INSPECT THEM AX...
Returns Accepted: Returns Accepted Restocking Fee: No Item must be returned within: 14 Days Refund will be given as: Money Back Return shipping will be paid by: Buyer Return policy details: Placement on Vehicle: Array Warranty: No THIS AUCTION FOR 2003 SUBARU LEGACY OUTBACK REAR AXLES LEFT AND RIGHT . REMOVED FROM A 2003 LEGACY OUTBACK , IN USED WORKING CONDITION , LOOK PICTURES PLEASE INSPECT ...
Item must be returned within: 14 Days Refund will be given as: Money Back Return shipping will be paid by: Buyer Restocking Fee: No Return policy details: Items must be unused, re-sellable and in original, undamaged manufacturer packaging, as shipped, free of any shipping stickers or marks - do not use the manufacturer packaging as your primary ship carton! Restocking Fee for buyer error / chan...
Item must be returned within: 30 Days Refund will be given as: Money Back Return shipping will be paid by: Buyer Returns Accepted: Returns Accepted Return policy details: Restocking Fee: No up for sale bmw 7 series e38 rear axles left or right side came out from 1997 bmw 740il this action is only left or right side axle . if you need more parts for same car please text 818-334-0852 or email me.
Similar
SoCal - Near Pasadena, California Front diff from an FJ80 NO SHIPPING $200 firm. Other parts from FJ80 available: Steering Box $175 firm Tie Rod Ends $20 - $35 - these can be shipped. Coil Buckets $30 Axle Housing Complete Rear Axle with E Locker 4.88 Nitro Gears $1,000 firm. If you want the third member only, price is the same.
PRODUCT INFO JDM Subaru WRX STi 06 07 V9 EJ207 Turbo Engine DCCD Transmission Rear Diff Axles All the accessories around the motor are included as seen in the pictures - Complete engine, DCCD Transmission, intercooler, rear differential, axles, Brembo Brakes(Gold version), Wire harness, ECU, Drive shaft, Front LCA, Rear LCA, rear subframe and rear trailing arms Transmission code: F4-TY856WB8KA ...
Condition: Used Placement on Vehicle: Right, Rear Brand: Chevrolet Warranty: Yes Surface Finish: original patina UPC: Does not apply This listing is for a USED rear right backing plate from a 11.5 full floating rear axle 14 bolt rear cover ONLY it is NOT the C-CLIP type axle. No other parts included. Will come off this original California truck. This is for a 2006 2500HD Will fit other years li...
Brand new adjustable spring plates for swing axle rear suspension: $99.95 Makes lowering and raising the rear of your '68 and earlier Bug, Ghia, or Type 3 much easier. We also have the matching urethane grommets to match for an additional $25 per set. Sold normally for 21-3/4" torsion bars (standard size bar), but available for longer bars if needed for the same price. Order here: http://shop.k...
These are BRAND NEW forged stub axles for either stock replacement on a Thing, or for converting your off-road Type 1 CV's to the larger Type 2 or Type 4 CV's for better travel. Sold each. We have great deals on CV's that will fit these that will give you up to 22 degrees of travel, or 10.5" out of a stock rear IRS suspension. We also have the conversion drive flanges for your trans. Order here...
Did you know you can get up to 10.5" of travel from the STOCK rear suspension in your IRS Bug? This kit comes with all necesary components for the upgrade, and works great! It works with your stock trailing arms, upper/lower shock mounts, and stock Type 1 IRS Trans. No welding is required. The 100mm CV joints are rated to give up to 17 degrees of articulation, but we have tested them successful...
This kit converts your Type 1 IRS rear drive axle to the larger and much stronger Bus components, as used in the '73 and '74 VW Thing. This kit is commonly used in street or strip cars with high output motors and off-road cars that take a beating! All components simply bolt right in to complete your conversion. We have used and tested this same kit in our own drag cars and off road cars and nev...
This kit is a premium race quality forged axle kit that will allow you to install your IRS 002 or 091 bus transmission in an IRS bug rear end that has 3" longer and 3" wider custom trailing arms. It comes with off-road prepped Porsche 930 CV joints that are rated to achieve a full 25 degrees of articulation, and are even stronger than the off-road prepped Type 2 ones. Compared to pretty much an...
Condition: Used Placement on Vehicle: Left, Right, Rear Warranty: No For sale are two USED rear stub axles. These were removed from a 1985 Porsche 911 Carrera, but should also work on 1976-1985 Porsche 911 non turbo models. The diameter if the stub axle is 100mm and they have 6 threaded bolt holes. They are in good used condition. We are selling these as is as pictured. Stock# 5729 and 112514 W...
Condition: Used Placement on Vehicle: Left, Rear Brand: Chevrolet Warranty: Yes Surface Finish: original patina UPC: Does not apply This listing is for a USED rear Left backing plate from a 11.5 full floating rear axle 14 bolt rear cover ONLY it is NOT the C-CLIP type axle. No other parts included. Will come off this original California truck. This is for a 2006 2500HD Will fit other years like...
1 + ... Next >